The plates I’ve been working on is moving very slowly. It had been a while since I’ve done a ceramic project. Not that long, but long enough I forgot how long it takes especially when you have limited time each night to work on them. Granted, the first layer was putzy because I had to figure out where colors go and matching them up on each plate. I started the second layer of underglaze and it’s moving much faster. I’m starting to realize these may not be finished by thanksgiving dinner, which is causing slight panic because that means I either need to go buy plates or serve everyone on disposable plates. Oy!
Next week I have some time off to get the house in order and finish up any projects before the big day. But with multiple layers, multiple firings to get these done and dry timing time between layers it will either squeak in at the last minute or totally be a disaster.
I really should’ve picked a quicker design instead of 32 little swatches on each plate. What was I thinking?
I recently realized Thanksgiving is coming up and I have a bunch of people coming to dinner. They won’t be coming for Thanksgiving, though. Instead, they will be coming for Meatballgiving. Because turkeys are stupid.
The plates we currently use were a first attempt at making plates last year. Some are too thick and some are a bit wobbly. I like them, but they definitely are not guest worthy. Plus, I don’t think I have enough of them.
With Meatballgiving quickly approaching I decided to just buy blank plates and decorate them myself. I had previously made some mini mock-ups (see below) and I decided to mostly stick with that. I originally did a mostly toned down rainbow of colors, but I think I’ll stick with solid bright colors. I’ll be keeping the jumbled up rainbow but adding more sections around the rim.
First things first, I created a template with my Cricut. I quickly added some lines and a center dot in illustrator and imported the lines and had the machine cut them out on a 12×12″ sheet of paper.
If your end up being interested in doing a similar plate set, here’s the template you can grab:
Next, I centered each plate on a banding wheel and found marked the center point. Taking my template, I aligned the center dot with the marked spot on the plate.
I didn’t want to use any adhesives which may distort the glazes and do crazy things during firing. So I grabbed a weight to hold down the paper while I make my marks. I then grabbed a mechanical pencil and extended the lead out further than usual so that the lead would slip through the cuts on the paper and hit the plate below.
And voila! I have a dozen plates ready to be underglazed in a bright rainbow of colors.
The template really saved a lot of time. You might think this is a lazy method, but considering these are just the salad plates and not the dinner plates, nor the mugs or bowls that still have to be done… I’ll happily accept being lazy.
I took a peek at the test plates in the kiln and I was not overwhelmed by the results. They are alright, but they are not what I hoped for. This is what I get for working off the colors in a brochure instead of physical test tiles. This is also the reason to do these tests before committing to a whole dish set. So I think my next project will be to take all my colors and make small color chips out of them. I already made a few but there is a whole shelf of colors yet to be made. It will be a project all by itself.
The next test plate I think I will stick with bright colors instead of trying to tone them down. The colors that came out bright on the plates are the ones I like the most. That and the purple came out a bit too close to the color blue.
After another week or working late and a weekend full of yard work and chores, I finally got around to glazing the test plates. I ended up creating 4 plates and loading them into the small test kiln. Last night I fired it up and I am hoping by the end of the day to be able to open it up and see how the designs came out. I checked on it before leaving the house early this morning and there was still 900 degrees of cooling left before I can open it up. Hopefully, one of these designs will end up being the new design for the household plates.
Even after firing up the kiln, I started thinking up new designs that might be cool. Who knows, I may make another batch of designs before deciding on one!
Unfortunately, I glazed the plates with clear glaze before taking this picture (dries white). So super boring photo, I know. But there is a design under that white coating.
Last night, I was using some of small saucers as testers for a new plate design. These will be used in my house and I want them to be colorful, but muted. So I selected a rainbow of underglazes but toned down each color. Instead of Red, I went with a Ruby. Instead of Green, I went with a Forest Green…. you get the idea. Some of these colors I didn’t have a darker shade so I made my best guess and will just hope for the best. I also rearranged the colors so it wasn’t such an obvious rainbow. Hopefully, I like the outcome and can move on to the dinner plates and glasses.
The test plates were bisque fired in the kiln last night to set the underglaze. Tonight, I should be able to glaze them and shove them right back in for the final result.
I took my cookie cutters off the 3D Printer and got to work on making some clay slabs to use them on. Everything did go off without a hitch.
If you’ve never used cookie cutters on clay, here’s a hint to great results:
Yup, that’s all, plastic wrap. I keep a big Costco roll of it in the workshop and it makes all the edges of my clay perfectly rounded. You can still muck things up trying to pull the wrap off the clay, but generally it’s pretty easy if you take your time and go slowly.
I’ll make a whole bunch of these while I’m at it. I just hate that I have to wait so long for them to dry out and be fired. I want the project done NOW and that just isn’t going to happen. Though I may go set these out in the sun today which will dry them out pretty damn quick.
I’ll also play with thickness. These are only a 1/4″ thick, but they seem a little too thick now that I’m looking at them again. The look I’m going for is cartoonish, so this may still work out just fine. I’ll make thinner ones tonight and see which I end up liking more.
If you haven’t figured it out yet, these are going to be coasters for my newly painted tables. Lumpy Space Princess (the cloud looking cookie cutter) will go on my Finn and Jake table and the Hamburger shaped ones will be Krabby Patties for my SpongeBob table. I still haven’t figured out my third table, but eventually I’ll make some for that theme as well.
I couldn’t wait to fill up the large kiln so I threw some items in the small kiln and fired it up. I had heard Mayco’s yarn bowls were recalled due to cracking. Yarn bowls are cute and all, but they aren’t very stable. While I didn’t experience any cracking the top of the bowl did bend inward a bit. I tried showing that in the picture above. Also I fired this because I wanted to try out one of the new glazes, Lime Shower, SW-148, which turned out great.
I also threw in a second bowl to try out this Amaco glaze combination…
Pretty, right? Its a little disappointing in real life…
Meh, right? Plus, there are spots that didn’t stay covered… I’m strategically not showing them in the photo. This one will be reglazed and refired. Hopefully this will come out better.